The Easy Petrol Post Driver is designed to enable one man to knock any size stake, peg or post into the ground, up to a 100mm (4") diameter. Manufactured in Australia, the high impact hammer action of 1720 BPM will drive a post into the ground in a matter of seconds.The power pack ...The Easy Petrol Post Driver is designed to enable one man to knock any size stake, peg or post into the ground, up to a 100mm (4") diameter. Manufactured in Australia, the high impact hammer action of 1720 BPM will drive a post into the ground in a matter of seconds.The power pack is the ultra-reliable Honda GX35T 4-Stroke Engine.
Benefits Portable – No pipes and generators needed Lightweight, only 15.3kg Ideal for Steep ground and inaccessible locations Physically less demanding than traditional methods Can be used all day without operator fatigue Applications Any shape from 10mm – 100mm Ø Fencing – Timber and Angle Iron Posts Landscaping – Tree Stakes Nurseries – Tree and plant support Vineyards – Especially steep hillsides Farming – Sheep and cattle fencing Construction – Temporary fencing/shuttering/ground pinning Contractors – Tent Stakes/Ground Anchors/Signage Festival/Fair Organisers – Signage/Temporary fencing What is included? One adapter; Choose from Round, Square or Rectangle from the drop down. (Other adapters can be purchased separately. All adapters are interchangeable with this machine.) Tough Box and 1 litre Fuel Can.
Instruction & Servicing Manual 6mm & 3mm Hex Key 5ml Loctite 50ml Crank Grease What is the maximum capacity? The maximum capacity of the machine is 4” round diameter. Our largest adapter is 107mm internal diameter. When the ground is very dry, compacted or stoney, you will need to make a pilot hole for posts larger than 78mm.
This can be either by hand using a Pilot-Bar, or mechanically using either our Pilot Core Tool or a mechanical earth Auger. Posts smaller than 78mm should not need a pilot hole. Ground conditions of Clay or Chalk may also require this method.
What adapters do I need? To get the most effective use from the Post Driver, the Adapter size must be a snug fit for your Posts. For shaped posts; squares / t-shapes etc the outer corners need to be within this capacity.